Process Data set: Tysnes 66 1200 (en)

Process Data set: Tysnes 66 1200 (en) en

Process information

Key Data Set Information
Location	CN
Geographical representativeness description	Nordic + Northwestern Europe
Reference year	2025
Name	Tysnes 66 1200
Technical purpose of product or process	Tysnes 66 is a tri-proof luminaire for garages, storage rooms and production facilities. It has low power consumption, high lumen output and long lifetime.It can easily be mounted on ceilings with clips or suspended in wires. Sturdy steel clips attached to the luminaire holds the diffuser. It has cable entries in both ends and weakening for cabling from the back.Tysnes 66 comes in 3 lengths and has dip switches on the driver that allows setting the required light level. Also available as emergency light, with a 3-hour battery pack. System Wattage: 34W. Luminous flux: 5510 lm. Efficacy: 157 lm/W. Colour temperature: 4000K. Colour rendering: Ra>80. MacAdams factor: SDCM: 3. Lifetime: L80/B20>100,000, L90>50,000. Light distribution: Direct. Control/Dimming: On/Off. Luminiare class: Class I. Housing: UV-stabilized polycarbonate. Optics: UV-stabilized polycarbonate. Height: 80.0mm. Length: 1200.0 mm. Width: 85.0 mm. EAN: 7021981200312 The EPD also covers the following product: EPD: 7021981200640 - TYSNES 66 1200 3000K Please note that the above has been calculated with the Norwegian Energy-mix. If you want an EPD with a specific energy-mix, please send us a request.
Classification	Class name : Hierarchy level EPDNorge: Construction / Electronic and electrical components and products
General comment on data set	Data quality: Specific data for the product composition are provided by the manufacturer. The data represent the production of the declared product and were collected for EPD development in the year of study. Background data is based on EPDs according to EN 15804 and different LCA databases. The data quality of the raw materials in A1 is presented in the table below. Allocation: The allocation is made in accordance with the provisions of EN 15804. Incoming energy and water and waste production in-house is allocated equally among all products through mass allocation. Effects of primary production of recycled materials is allocated to the main product in which the material was used. The recycling process and transportation of the material is allocated to this analysis. Cut-off criteria: All major raw materials and all the essential energy is included. The production processes for raw materials and energy flows with very small amounts (less than 1%) can be excluded. These cut-off criteria do not apply for hazardous materials and substances.
Copyright	Yes
Owner of data set	SG Armaturen AS
Quantitative reference
Reference flow(s)	Tysnes 66 1200 - 1.0 * 1.0 Stück (Number of pieces)
Biogenic carbon content	Carbon content (biogenic): 0.0 kg Carbon content (biogenic) - packaging: 0.377077468331 kg
Time representativeness
Data set valid until	2030
Time representativeness description	2025-02-24 - 2030-02-24
Publication date	2025-02-24
Technological representativeness
Technology description including background system	Link to product data on our website: https://www.sg-as.com/products/tysnes/120031/pdf/specification_120031.pdf Link to CE Declaration: https://www.sg-as.com/assets/product/default/data/702865_Tysnes/50/702865_Tysnes%2066.pdf

Modelling and validation

Subtype

specific dataset

LCA methodology report

IBU PCR - Part B for luminaires, lamps, and components for luminaires

Data sources, treatment and representativeness

Documentation of data quality management

IBU PCR - Part B for luminaires, lamps, and components for luminaires

Data source(s) used for this data set

ecoinvent database (all versions)

Original EPDs

NEPD-9228-8810_Tysnes-66-1200.pdf

Completeness

Validation

Type of review
Independent external review

Reviewer name and institution
Vito D’Incognito

Compliance Declarations

Compliance

Compliance system name

EN 15804+A2

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 14025

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 21930

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Administrative information

Data generator
Data set generator / modeller	LCA.no AS
Data entry by
Time stamp (last saved)	2025-03-22T14:31:53
Data set format(s)	ILCD format EPD Data Format Extensions v1.2
Publication and ownership
UUID	14aa4d18-e480-4e3a-8e18-ff209fe1e072
Date of last revision	2025-02-20T16:05:01.2742859Z
Data set version	00.03.000
Registration authority	EPD Norway
Registration number	NEPD-9228-8810
Owner of data set	SG Armaturen AS
Copyright	Yes
License type	Free of charge for all users and uses
Access and use restrictions	None
Publisher	EPD Norway

Environmental indicators

Indicators of life cycle

Indicator	Direction	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Use of renewable primary energy (PERE)	Input	MJ	38.08	0.05213	0.6339	0.1697	0.003033	1.134E+4	0.02034	0.1185	0.07929	-7.625
Use of renewable primary energy resources used as raw materials (PERM)	Input	MJ	4.882	0	0	0	-4.881	0	0	0	0	0
Total use of renewable primary energy resource (PERT)	Input	MJ	42.96	0.05213	0.6339	0.1697	-4.877	1.134E+4	0.02034	0.1185	0.07929	-7.625
Use of non renewable primary energy (PENRE)	Input	MJ	283.9	4.606	7.792	14.94	0.1843	876.9	1.797	0.9344	0.3406	-15.77
Use of non renewable primary energy resources used as raw materials (PENRM)	Input	MJ	25.33	0	0	0	0	0	0	-26.64	0	0
Total use of non renewable primary energy resource (PENRT)	Input	MJ	309.2	4.606	7.792	14.94	0.1843	876.9	1.797	-25.71	0.3406	-15.77
Use of secondary material (SM)	Input	kg	1.276	0	0	0	0	0	0	0	0.001825	0.0178
Use of renewable secondary fuels (RSF)	Input	MJ	0.3918	0.00102	0.0003508	0.005484	0.0001006	8.906	0.0003978	0.002064	0.0003467	0.009213
Use of non renewable secondary fuels (NRSF)	Input	MJ	0.7201	0.008657	0.003825	0.02988	0.0004148	22.19	0.003378	-0.00005764	0.01602	-0.1048
Use of net fresh water (FW)	Input	m3	0.2319	0.000515	0.004859	0.001303	0.00008694	84.7	0.000201	0.001857	0.0002856	-0.01847
Hazardous waste disposed (HWD)	Output	kg	0.1065	0.0004162	0.0006493	0.0007586	0	0.5622	0.0001624	0.00002931	0.08876	-0.005494
Non hazardous waste dispose (NHWD)	Output	kg	3.145	0.2211	0.08105	0.4737	0.8142	67.45	0.08627	0.04056	0.5773	-0.3131
Radioactive waste disposed (RWD)	Output	kg	0.0007043	0.00003023	0.00001514	0.0001023	0	0.00784	0.00001179	0.000001517	9.517E-7	-0.00004399
Components for re-use (CRU)	Output	kg	0	0	0	0	0	0	0	0	0	0
Materials for recycling (MFR)	Output	kg	0	0	0.04004	0	0.7574	0	0	0.3469	0.00004279	-0.0006968
Materials for energy recovery (MER)	Output	kg	0	0	0.003773	0	0.0009938	0	0	0.4777	0.000001047	-0.00009174
Exported electrical energy (EEE)	Output	MJ	0	0	0.005797	0	0.04657	0	0	0.7334	0.00006789	-0.0002248
Exported thermal energy (EET)	Output	MJ	0	0	0.08771	0	0.7045	0	0	11.1	0.001027	-0.003401

Core environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Abiotic depletion potential - fossil resources (ADPF)	MJ	309	4.606	7.792	14.94	0.1843	875.6	1.797	0.9342	0.3403	-15.76
Abiotic depletion potential - non-fossil resources (ADPE)	kg Sb-eqv.	0.006602	0.000008362	0.000002	0.0000205	3.206E-7	0.004783	0.000003263	6.278E-7	1.509E-7	-0.001457
Acidification potential, Accumulated Exceedance (AP)	mol H+ eqv.	0.2026	0.0009325	0.004392	0.01567	0.00006237	0.5012	0.0003639	0.0005572	0.0001323	-0.07345
Global Warming Potential - biogenic (GWP-biogenic)	kg CO2 eqv.	-1.233	0.0001214	0.0001331	0.0003761	1.38	1.773	0.00004736	0.001127	0.0004751	-0.003249
Global Warming Potential - fossil fuels (GWP-fossil)	kg CO2 eqv.	25.31	0.3117	0.8575	1.056	0.01317	64.14	0.1216	1.206	0.07394	-1.305
Global Warming Potential - total (GWP-total)	kg CO2 eqv.	24.12	0.312	0.8578	1.056	1.394	66.18	0.1217	1.207	0.07458	-1.313
Global Warming Potential - land use and land use change (GWP-luluc)	kg CO2 eqv.	0.04045	0.000114	0.00009343	0.0005194	0.000004356	0.2646	0.00004447	0.0001817	0.0001609	-0.003881
Global warming potential except emissions and uptake of biogenic carbon (GWP-IOBC/GHG)	kg CO2 eqv.	25.49	0.312	0.8173	1.056	0.01318	66.05	0.1217	1.207	0.07623	-1.397
Eutrophication potential - freshwater (EP-freshwater)	kg P eqv.	0.002988	0.000002924	0.00001555	0.000006884	1.081E-7	0.004613	0.000001141	0.000002869	8.816E-7	-0.000436
Eutrophication potential - marine (EP-marine)	kg N eqv.	0.0269	0.0001836	0.001023	0.003764	0.00002063	0.05509	0.00007164	0.0001737	0.00009158	-0.003948
Eutrophication potential - terrestrial (EP-terrestrial)	mol N eqv.	0.3383	0.002053	0.01128	0.04191	0.0002233	0.717	0.0008011	0.001839	0.0003733	-0.05393
Photochemical Ozone Creation Potential (POCP)	kg NMVOC eqv.	0.09996	0.0007688	0.004252	0.01136	0.00006419	0.1928	0.0003	0.0004679	0.0001555	-0.01569
Depletion potential of the stratospheric ozone layer (ODP)	kg CFC 11 eqv.	0.00001271	6.779E-8	3.153E-8	2.325E-7	2.781E-9	0.000004398	2.645E-8	6.869E-9	2.801E-9	-0.004984
Water (user) deprivation potential (WDP)	m3 world eqv.	611.9	1.502	0.7274	9.653	0.2335	3414	0.586	7.848	1.911	-23.98

Additional environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	De-construction C1	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
¹This impact category deals mainly with the eventual impact of low dose ionizing radiation on human health of the nuclear fuel cycle. It does not consider effects due to possible nuclear accidents, occupational exposure nor due to radioactive waste disposal in underground facilities. Potential ionizing radiation from the soil, from radon and from some construction materials is also not measured by this indicator.
²The results of this environmental impact indicator shall be used with care as the uncertainties on these results are high or as there is limited experiences with the indicator.
Potential Human exposure efficiency relative to U235 (IRP)¹	kBq U235 eqv.	0.8906	0.01914	0.01125	0.06465	0.0007884	15.88	0	0.007469	0.004332	0.00104	-0.05116
Potential incidence of disease due to PM emissions (PM)²	disease incidence	0.000001503	2.016E-8	5.152E-8	3.875E-8	9.2E-10	0.000003593	0	7.864E-9	3.237E-9	2.47E-9	-1.961E-7
Potential Soil quality index (SQP)²	unitless	87.15	3.156	1.516	7.355	0.1236	441	0	1.231	0.2026	0.9757	-17.09
Potential Comparative Toxic Unit for humans - non-cancer effects (HTP-nc)²	CTUh	0.000001354	3.663E-9	3.742E-8	7.674E-9	3.08E-10	0.000004485	0	1.43E-9	6.301E-8	6.92E-10	-2.687E-7
Potential Comparative Toxic Unit for humans - cancer effects (HTP-c)²	CTUh	3.416E-8	0	2.36E-10	0	7E-12	1.904E-7	0	0	1.083E-9	8.4E-11	-4.953E-9
Potential Comparative Toxic Unit for ecosystems (ETP-fw)²	CTUe	1785	3.734	19.4	10.27	0.2457	3989	0	1.457	3.723	60.9	-558