Process Data set: Jackopor Norway, Søgne (en)

Process Data set: Jackopor Norway, Søgne (en) en

Process information

Key Data Set Information
Location	NO
Geographical representativeness description	Norway
Reference year	2025
Name	Jackopor Norway, Søgne
Technical purpose of product or process	Product variation and calculation of averages The insulation board is provided in several dimensions and thicknesses. Please use the conversion table below for other sizes than the declared unit. Product description Expanded polystyrene (EPS) is a common material used for thermal insulation of buildings, including floors, walls and ceilings. It is a polymer foam, consisting of air-filled polystyrene cells. EPS is manufactured through permeating polystyrene beads with pentane, allowing the beads to expand when exposed to steam. This addition of a so-called blowing agent adds 4% - 6% w/w. The expanded polystyrene (EPS) beads are then fed into a block molding machine, where steam and pressure forms large blocks of EPS. The amount of EPS going into the mold determines the densitiy of the block, where pressure class 80 provides a density at 80 kN/m2, which is approximately 15 kg/m3. After molding, the remaining blowing agent, pentane, is aired out and the blocks are cut into the desired shape. Weight per declared unit is 0,57 kg given a density of 15 kg/cubic meter with a thickness of 38 mm.
General comment on data set	Data quality: Specific data for the product composition are provided by the manufacturer. The data represent the production of the declared product and were collected for EPD development in the year of study. Background data is based on EPDs according to EN 15804 and different LCA databases. The data quality of the raw materials in A1 is presented in the table below. Allocation: The allocation is made in accordance with the provisions of EN 15804+A2. Incoming energy and water and waste production in-house is allocated equally among all products through mass allocation. Effects of primary production of recycled materials is allocated to the main product in which the material was used. The recycling process and transportation of the material is allocated to this analysis. Cut-off criteria: All major raw materials and all the essential energy is included. The production processes for raw materials and energy flows with very small amounts (less than 1%) are not included. These cut-off criteria do not apply for hazardous materials and substances.
Copyright	Yes
Owner of data set	BEWI ASA, Insulation and Construction
Quantitative reference
Reference flow(s)	Jackopor Norway, Søgne - 1.0 * 1.0 qm (Area)
Biogenic carbon content	Carbon content (biogenic): 0.0 kg Carbon content (biogenic) - packaging: 0.0 kg
Time representativeness
Data set valid until	2030
Publication date	0001-01-03
Technological representativeness
Technology description including background system	CE marking: EPS insulation boards are CE certified according to NS-EN 13163 Typical size: 600 mm x 1200 mm, 1200 x 2400mm Typical thickness: 10 mm - 400 mm Bending strength: >50 kN/m2

Modelling and validation

Subtype

specific dataset

LCA methodology report

NPCR 012:2022 Part B for Thermal insulation products

Data sources, treatment and representativeness

Documentation of data quality management

NPCR 012:2022 Part B for Thermal insulation products

Data source(s) used for this data set

ecoinvent database (all versions)

Original EPDs

NEPD-14448-14915_Jackopor-Norway--S--gne.pdf

Completeness

Validation

Type of review
Independent external review

Reviewer name and institution
Elisabet Amat

Compliance Declarations

Compliance

Compliance system name

EN 15804+A2

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 14025

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 21930

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Administrative information

Data generator
Data set generator / modeller	LCA.no AS
Data entry by
Time stamp (last saved)	2025-12-16T13:04:49
Data set format(s)	ILCD format EPD Data Format Extensions v1.2
Publication and ownership
UUID	1067fc20-af5d-4b55-8470-bd7060086291
Date of last revision	2025-12-15T14:56:59.2432757Z
Data set version	00.02.001
Registration authority	EPD Norway
Registration number	NEPD-14448-14915
Owner of data set	BEWI ASA, Insulation and Construction
Copyright	Yes
License type	Free of charge for all users and uses
Access and use restrictions	None
Publisher	EPD Norway

Environmental indicators

Indicators of life cycle

Indicator	Direction	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Use of renewable primary energy (PERE)	Input	MJ	0.2744	0.008293	3.222	0.002982	0.00009896	0.0008251	0.002827	0.00004141	-7.113
Use of renewable primary energy resources used as raw materials (PERM)	Input	MJ	0	0	0	0	0	0	0	0	0
Total use of renewable primary energy resource (PERT)	Input	MJ	0.2744	0.008293	3.222	0.002982	0.00009896	0.0008251	0.002827	0.00004141	-7.113
Use of non renewable primary energy (PENRE)	Input	MJ	28.83	0.7126	0.2526	0.2371	0.003919	0.0656	0.09822	0.0007105	40.4
Use of non renewable primary energy resources used as raw materials (PENRM)	Input	MJ	18.46	0	0	0	0	0	0	0	0
Total use of non renewable primary energy resource (PENRT)	Input	MJ	47.3	0.7126	0.2526	0.2371	0.003919	0.0656	0.09822	0.0007105	40.4
Use of secondary material (SM)	Input	kg	0.000007223	0	0	0	0	0	0	0	0
Use of renewable secondary fuels (RSF)	Input	MJ	0.003917	0.0002835	0.002581	0.0001043	0.000002596	0.00002886	0.00007882	0.000001029	-0.00074
Use of non renewable secondary fuels (NRSF)	Input	MJ	0.0002337	0.0008935	0.00673	0.0003496	0.000006795	0.00009673	0	0.0001639	-0.4856
Use of net fresh water (FW)	Input	m3	0.0369	0.00007407	0.0249	0.00002698	0.000002072	0.000007464	0.0002778	6.529E-7	0.02933
Hazardous waste disposed (HWD)	Output	kg	0.001817	0.00003746	0.003624	0.00001297	0	0.000003589	0	0.001296	0.0007259
Non hazardous waste dispose (NHWD)	Output	kg	0.02816	0.05289	0.02324	0.02061	0.012	0.005701	0	0.0006419	-0.005859
Radioactive waste disposed (RWD)	Output	kg	0.000001078	0.000004881	0.000002288	0.000001619	0	4.479E-7	0	4.285E-9	-0.000006098
Components for re-use (CRU)	Output	kg	0	0	0	0	0	0	0	0	0
Materials for recycling (MFR)	Output	kg	0	0	0.008181	0	0.006125	0	0.05586	0	0
Materials for energy recovery (MER)	Output	kg	0	0	0.02006	0	6E-7	0	0.5027	0	0
Exported electrical energy (EEE)	Output	MJ	0	0	0.01262	0	9.218E-7	0	0.8859	0	0
Exported thermal energy (EET)	Output	MJ	0	0	0.1909	0	0.00001395	0	13.4	0	0

Core environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Abiotic depletion potential - fossil resources (ADPF)	MJ	44.34	0.7125	0.2522	0.2371	0.003919	0.06559	0.09822	0.0007105	40.39
Abiotic depletion potential - non-fossil resources (ADPE)	kg Sb-eqv.	5.57E-7	7.206E-7	4.473E-7	2.601E-7	5.059E-9	7.196E-8	4.951E-8	4.37E-10	-1.97E-7
Acidification potential, Accumulated Exceedance (AP)	mol H+ eqv.	0.002318	0.0003933	0.00007716	0.000047	0.000001172	0.000013	0.0001906	2.748E-7	0.005738
Global Warming Potential - biogenic (GWP-biogenic)	kg CO2 eqv.	0.005442	0.00001813	0.002462	0.000006252	1.312E-7	0.00000173	0.00001105	4.142E-8	0.01236
Global Warming Potential - fossil fuels (GWP-fossil)	kg CO2 eqv.	1.302	0.04564	0.02665	0.0146	0.0009505	0.004038	1.603	0.00007809	1.793
Global Warming Potential - total (GWP-total)	kg CO2 eqv.	1.308	0.04567	0.02919	0.01461	0.0009507	0.004041	1.603	0.00007815	1.802
Global Warming Potential - land use and land use change (GWP-luluc)	kg CO2 eqv.	0.000313	0.00001656	0.00007487	0.000004447	7.29E-8	0.00000123	0.000001751	1.198E-8	-0.003182
Global warming potential except emissions and uptake of biogenic carbon (GWP-IOBC/GHG)	kg CO2 eqv.	1.308	0.04567	0.03108	0.01461	0.0009505	0.004041	1.603	0.00008107	1.803
Eutrophication potential - freshwater (EP-freshwater)	kg P eqv.	0.000005501	3.287E-7	7.66E-7	1.161E-7	1.956E-9	3.213E-8	1.134E-7	1.055E-9	0.00002503
Eutrophication potential - marine (EP-marine)	kg N eqv.	0.0006164	0.00009445	0.00001824	0.00001029	0.000001072	0.000002847	0.00009168	8.584E-8	0.0007285
Eutrophication potential - terrestrial (EP-terrestrial)	mol N eqv.	0.006694	0.001051	0.0001832	0.0001148	0.000004199	0.00003176	0.0009814	9.767E-7	0.007833
Photochemical Ozone Creation Potential (POCP)	kg NMVOC eqv.	0.002926	0.000311	0.01062	0.00004508	0.000001381	0.00001247	0.0002353	2.695E-7	0.004907
Depletion potential of the stratospheric ozone layer (ODP)	kg CFC 11 eqv.	8.5E-10	1.066E-8	1.33E-9	3.519E-9	5.7E-11	9.74E-10	1.15E-9	8E-12	-0.00678
Water (user) deprivation potential (WDP)	m3 world eqv.	1.197	0.4852	0.149	0.1818	0.01385	0.05029	0.2179	0.007361	-2.937

Additional environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	De-construction C1	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
¹This impact category deals mainly with the eventual impact of low dose ionizing radiation on human health of the nuclear fuel cycle. It does not consider effects due to possible nuclear accidents, occupational exposure nor due to radioactive waste disposal in underground facilities. Potential ionizing radiation from the soil, from radon and from some construction materials is also not measured by this indicator.
²The results of this environmental impact indicator shall be used with care as the uncertainties on these results are high or as there is limited experiences with the indicator.
Potential Human exposure efficiency relative to U235 (IRP)¹	kBq U235 eqv.	0.02817	0.003106	0.004563	0.001036	0.00001771	0	0.0002867	0.0001642	0.000003371	-0.007029
Potential incidence of disease due to PM emissions (PM)²	disease incidence	1.808E-8	3.653E-9	7.26E-10	1.341E-9	2.1E-11	0	3.71E-10	8.03E-10	3E-12	1.421E-8
Potential Soil quality index (SQP)²	unitless	1.341	0.708	0.1215	0.2718	0.006842	0	0.07519	0.01169	0.00196	-8.815
Potential Comparative Toxic Unit for humans - non-cancer effects (HTP-nc)²	CTUh	2.263E-8	5.02E-10	5.4E-10	1.68E-10	4E-12	0	4.6E-11	2.663E-9	2E-12	-2.97E-9
Potential Comparative Toxic Unit for humans - cancer effects (HTP-c)²	CTUh	5.09E-10	0	2.6E-11	0	0	0	0	6.7E-11	0	2.56E-10
Potential Comparative Toxic Unit for ecosystems (ETP-fw)²	CTUe	211.6	0.5037	0.4655	0.1733	0.00374	0	0.04796	0.2369	0.001306	0.4153