A more recent version of this data set exists in the database.
Process information
| Key Data Set Information | |
| Location | NO |
| Geographical representativeness description | Nordic & Baltic countries |
| Reference year | 2025 |
| Name |
|
| Use advice for data set | The approach is “cradle to gate” (A1–A3) with modules C1–C4 and module D and modules (A4 – A5). The production process starts from raw materials, that are purchased from external and intercompany suppliers and stored in the plant. Bulk raw materials are stored in specific silos and added automatically in the production mixer, according to the formula of the product. Other raw materials, supplied in bags, big bags or tanks, are stored in the warehouse and added automatically or manually in the mixer. The production is a discontinuous process, in which all the components are mechanically mixed in batches. The semi-finished product is then packaged, put on wooden pallets and stored in the finished products warehouse. The quality of final products is controlled before the sale. |
| Technical purpose of product or process | Keraflex Extra LITE S1 Zero white is a high-performance, deformable, cementitious adhesive, with no vertical slip or with high opacity, extended open time, with very low emission of volatile organic compounds and fully offset Greenhouse Gas emissions, for ceramic tiles and stone material including in large format. Keraflex Extra LITE S1 Zero grey is used for internal and external bonding, both on floors and walls, of ceramic tiles of all types and formats (thin ceramic tiles, double-fired, single-fired, clinker, terracotta etc.), stone material which is dimensionally stable and not sensitive to moisture or staining and all types of mosaics. For more information see the TDS (Technical Data Sheet) on Mapei AS website (www.mapei.com/no). |
| Classification |
Class name
:
Hierarchy level
|
| General comment on data set | Data quality: Specific data for the product composition are provided by the manufacturer. The data represent the production of the declared product and were collected for EPD development in the year of study. Background data is based on EPDs according to EN 15804 and different LCA databases. The data quality of the raw materials in A1 is presented in the table below. Allocation: The allocation is made in accordance with the provisions of EN 15804. Incoming energy and water and waste production in-house is allocated equally among all products through mass allocation. Effects of primary production of recycled materials is allocated to the main product in which the material was used. The recycling process and transportation of the material is allocated to this analysis. Cut-off criteria: All major raw materials and all the essential energy is included. The production processes for raw materials and energy flows with very small amounts (less than 1%) are not included. These cut-off criteria do not apply for hazardous materials and substances. |
| Copyright | Yes |
| Owner of data set | |
| Quantitative reference | |
| Reference flow(s) |
|
| Biogenic carbon content |
|
| Time representativeness | |
| Data set valid until | 2030 |
| Time representativeness description | 2025-05-05 - 2030-05-05 |
| Technological representativeness | |
| Technology description including background system | Keraflex Extra LITE S1 Zero is a cementitious (C), improved (2), with no vertical slip (T) and extended open time (E) deformable (S1) adhesive. The product is C2TES1 class if mixed with approximately 6.45 - 6.75 litres of water. The conformity of Keraflex Extra S1 Zero (C2TES1 class) is certified by TT certificates n° 24/32305834 (white version), issued by APPLUS, LGAI Technological Center Laboratory, Bellaterra (Spain). |
Modelling and validation
| Subtype | specific dataset | ||||
| LCA methodology report | |||||
| Data sources, treatment and representativeness | |||||
| Documentation of data quality management | |||||
| Data source(s) used for this data set | |||||
| Completeness | |||||
| Validation | |||||
| |||||
| Compliance Declarations | |||||
| Compliance |
Compliance system name
EN 15804+A2
|
Approval of overall compliance
Fully compliant |
Nomenclature compliance
Fully compliant |
Methodological compliance
Fully compliant |
Review compliance
Fully compliant |
Documentation compliance
Fully compliant |
Quality compliance
Fully compliant |
| Compliance |
Compliance system name
|
Approval of overall compliance
Fully compliant |
Nomenclature compliance
Fully compliant |
Methodological compliance
Fully compliant |
Review compliance
Fully compliant |
Documentation compliance
Fully compliant |
Quality compliance
Fully compliant |
| Compliance |
Compliance system name
|
Approval of overall compliance
Fully compliant |
Nomenclature compliance
Fully compliant |
Methodological compliance
Fully compliant |
Review compliance
Fully compliant |
Documentation compliance
Fully compliant |
Quality compliance
Fully compliant |
Administrative information
| Data generator | |
| Data set generator / modeller |
|
| Data entry by | |
| Time stamp (last saved) | 2025-09-01T00:42:19 |
| Data set format(s) | |
| Publication and ownership | |
| UUID | 0c1cacc9-657c-44df-82a3-e07079ce8f18 |
| Date of last revision | 2025-04-30T14:35:27.1910129Z |
| Data set version | 00.06.000 |
| Registration authority | |
| Registration number | NEPD-9025-9025-1 |
| Owner of data set | |
| Copyright | Yes |
| License type | Free of charge for all users and uses |
| Access and use restrictions | None |
Environmental indicators
Indicators of life cycle