Process information
| Key Data Set Information | |
| Location | NO |
| Geographical representativeness description | Global, mainly Europe. |
| Reference year | 2024 |
| Name |
|
| Technical purpose of product or process | Gravity™ was designed with the intention to create a single chair that could accommodate both relaxation and productivity. Its four angles allow postures ranging from kneeling to fully reclined. You can use it as a kneeling chair when leaning forward and shift your weight slightly backwards for an upright position, placing your feet on either the floor or shin cushions for variation. To assume a reclined position, gently push away from the ground and lean all the way back until your legs are elevated above your heart. In this levitation-like position, the chair gently rocks in response to the rhythm of your breathing and allows you to relax into weightlessness. The space between the headrest and tilted backrest provides freedom of movement for the arms and shoulders. The headrest itself can be moved up or down to fit your needs. Gravity™ is available in a natural or black finish and a wide range of upholstery fabrics and colors. The wooden runners are made from layers of beech and ash veneer. Designed by Peter Opsvik in 1983. More information on Gravity here: www.varierfurniture.com/collection/gravity |
| Classification |
Class name
:
Hierarchy level
|
| General comment on data set | Data quality: Specific data for the product composition are provided by the manufacturer. They represent the production of the declared product and were collected for EPD development in the year of study. Background data is based on registered EPDs according to EN 15804, Ostfold Research databases, ecoinvent and other LCA databases. The data quality of the raw materials in A1 is presented in the table below. Allocation: The allocation is made in accordance with the provisions of EN 15804. Incoming energy and water and waste production in-house is allocated equally among all products through mass allocation. Effects of primary production of recycled materials is allocated to the main product in which the material was used. The recycling process and transportation of the material is allocated to this analysis. Cut-off criteria: All major raw materials and all the essential energy is included. The production processes for raw materials and energy flows with very small amounts (less than 1%) are not included. These cut-off criteria do not apply for hazardous materials and substances. |
| Copyright | Yes |
| Owner of data set | |
| Quantitative reference | |
| Reference flow(s) |
|
| Biogenic carbon content |
|
| Time representativeness | |
| Data set valid until | 2029 |
| Time representativeness description | "2024-02-13" - "2029-02-13" |
| Technological representativeness | |
| Technology description including background system | Chair Measurement: W 73 cm x D 135 cm x H 122 cm Box Measurement: H 8 cm x L 147 cm x W 58 cm |
Modelling and validation
| Subtype | specific dataset | ||||
| LCA methodology report | |||||
| Data sources, treatment and representativeness | |||||
| Documentation of data quality management | |||||
| Data source(s) used for this data set | |||||
| Completeness | |||||
| Validation | |||||
| |||||
| Compliance Declarations | |||||
| Compliance |
Compliance system name
EN 15804+A2
|
Approval of overall compliance
Fully compliant |
Nomenclature compliance
Fully compliant |
Methodological compliance
Fully compliant |
Review compliance
Fully compliant |
Documentation compliance
Fully compliant |
Quality compliance
Fully compliant |
| Compliance |
Compliance system name
|
Approval of overall compliance
Fully compliant |
Nomenclature compliance
Fully compliant |
Methodological compliance
Fully compliant |
Review compliance
Fully compliant |
Documentation compliance
Fully compliant |
Quality compliance
Fully compliant |
| Compliance |
Compliance system name
|
Approval of overall compliance
Fully compliant |
Nomenclature compliance
Fully compliant |
Methodological compliance
Fully compliant |
Review compliance
Fully compliant |
Documentation compliance
Fully compliant |
Quality compliance
Fully compliant |
Administrative information
| Data generator | |
| Data set generator / modeller |
|
| Data entry by | |
| Time stamp (last saved) | 2024-02-13T21:24:58 |
| Data set format(s) | |
| Publication and ownership | |
| UUID | 043142a6-c792-4b2d-a672-6b6dc578c06f |
| Date of last revision | 2024-01-05T08:31:07.4204719Z |
| Data set version | 00.03.000 |
| Registration authority | |
| Registration number | NEPD-5965-5060-EN |
| Owner of data set | |
| Copyright | Yes |
| License type | Free of charge for all users and uses |
| Access and use restrictions | None |
Environmental indicators
Indicators of life cycle